Feedback
RU
Designation: establishment of effort in brake rigging
Applying: tetraaxial freight cars
Note: are fabricated according to TU 3184-555-05744521-2013
Ram cases, front and back covers and pistons are cast-iron.
The shaft is braced with the piston.
On the piston is settled sealing rubber gland and oil felt ring.
In the front end cover is installed screen filter. The possibility of dead spot bracket settling on the blank end cover of linkage is provided, too.
A design feature of brake cylinder 188B-02 is the location of the drain channel in the front cover (the drain channel is located toward the mating flange).
| Operating pressure of compressed air | MPa (kgf/cm2) | up to 0,6 (6,0) |
| Diameter of cylinder | mm | 356 |
| Maximal throw | mm | 240 |
| Additional thread | G ¾-B | |
| Quantity of bores Ø18mm | 6 | |
| Overall dimensions | mm | 785 * 453 * 424 |
| Weight | kg | 115 |
